| |
|
|
 |
 |
| |
Product Code |
Product Suffix |
Product Description |
|
Product: |
801 |
|
METAL CONDITIONER |
|
Used In: |
Diamont & Latin America RM |
|
Used As: |
Miscellaneous (eg. Sandfix, Cleaner, Stone Chip, etc.) |
|
|
|
|
R-M 801 Metal Conditioner is a metal etching, acid type of cleaner which leaves an adherent phosphate coating.
It is;
- used to neutralize soldering flux
- used to remove light rust
- used to promote adhesion of subsequent coatings
- non-flammable
For use on bare steel and aluminum to clean and mildly etch the metal prior to priming. Improves adhesion and minimizes rust creepage resulting in a more durable finish.
After sanding the bare metal area, apply reduced R-M 801 Metal Conditioner with a clean cloth or brush. Heavily rusted areas should be scrubbed with steel wool that has been wetted with the reduced R-M 801 solution. Allow R-M 801 to remain on the metal for at least one minute. DO NOT let the R-M 801 dry on the substrate. While still wet, wipe the R-M 801 off with a clean, dry cloth.
|
 |
|
|
